John Louis Home JLH-552 Installation Guide download pdf (Page 2)

Ensure that the angle bracket is ush with the back wall and the underside

of the front shelf rail.

3. Insert #8 3in. screw into angle bracket.

4. Screw part way into wall to mark bracket location

5. Unscrew & remove bracket.

6. Use wall anchor at mark if no stud is present.

7. Insert the screw tip into the anchor & rotate angle bracket into position.

8. Secure bracket using #8 3in. screw.

9. Insert mushroom cap into angle bracket screw hole

10. Repeat for remaining angle bracket.

STEP 3 - Attaching Garment Bar

Measure required distance & cut garment bar if necessary.

1. Insert the bar end into the end of the garment bar.

2. Turn clockwise to tighten & repeat for opposite bar end.

3. Place the garment bar onto the J-hooks.

4. Secure the bar to the J-hooks using #6 1 1/4in. self tapping screws.

Installing Perpendicular / Corner Metal

Garment Bars

Follow metal garment bar installation process for 1st shelf.

1. Place a hanging item on the installed garment bar.

2. Use the edge of the garment to determine the end of the 2nd garment bar.

3. Allow for space between the end of the 2nd garment bar & clothing.

4. Install 2nd garment bar following metal garment bar installation process.

1 2 3 4 5 6

No comments

John Louis Home JLH-552 Installation Guide Page 2