John Louis Home JLH-574 Installation Guide download pdf (Page 2)

STEP 2 - Attaching Hardware To Side

Wall, Tower Side and/or Free Hanging

ATTACHING SHELF END TO SIDE WALL

1. Place shelf onto L clip hardware.

2. Place Shelf End hardware onto end of shelf.

5. Secure L clip to the wall using # 8 1 1/2in. screws at hole locations.

6. Repeat for remaining L clip locations.

3. Place level onto shelf & level shelf front to back.

4. Mark Shelf End hardware location.

5. Remove Shelf.

6. Place Shelf End hardware at marked location & mark screw hole locations.

7. Install wall anchors if no stud is present.

8. Secure Shelf to the wall using # 8 1 1/2in. screws at hole locations.

9. Repeat connection type process for opposite side.

ATTACHING SHELF END TO TOWER SIDE

1. Place shelf onto L clip hardware.

2. Place Shelf End hardware onto end of shelf.

3. Place level onto shelf & level shelf front to back.

4. Mark Shelf End hardware location.

5. Remove Shelf.

6. Place Shelf End hardware at marked location & mark screw hole locations.

7. Secure Shelf to the tower using # 6 3/4in. screws at hole locations.

8. Repeat connection type process for opposite side.

CREATING FREE HANGING SHELF (no side attachment)

1. Place shelf onto L clip hardware & place a level onto shelf.

2. Place angle bracket under shelf ush with wall & underside of front rail.

3. Level shelf front to back.

1 2 3 4 5 6 7 8

No comments

John Louis Home JLH-574 Installation Guide Page 2